VERSALIFT SST-40-EIH-02 equipped as follows:
- 45 ft. working height
- Platform capacity of 350 lbs
- End mounted closed 24 in. x 30 in. x 42 in. fiberglass platform with one step, liner, and cover
- VERSALIFT TruGuard™ dielectric isolating system with right hand single
stick control. All control handles are isolated and tested per ANSI 92.2. The
high resistive dielectric system is protected from direct environmental and
job related contamination. TruGuard™ technology incorporates the use of
full hydraulic controls with durable metal handles and linkages
- 180° hydraulic platform rotator
- Full pressure turret mounted lower controls including override
- Engine start/stop system with controls at platform and lower controls
- Continuous unrestricted rotation including three pass collector ring
- Five GPM open center hydraulic system
- Chassis insulating system (lower boom insert) including fiberglass
compensation link providing 12 inches insulation gap
- Fiberglass inner boom and patented ELECTROGARD providing 42 in.
insulation gap fully retracted meeting ANSI A92.2 requirements for
Category C, 46 KV and below
- Hydraulic tool power at bucket. Quick disconnect couplers not included
- ELECTROGARD and inner boom finished with white urethane paint over
white gel coat
- Integral hydraulic oil reservoir with dual sight gauges and 15 gal. capacity
- Master/slave hydraulic leveling with upper control to tilt for clean-out and rescue. Leveling control at lower controls
- Non‑lube bearings used at all pivot points
- Multi‑link hose carrier system through booms
- Boom cradle and ratchet type tie down strap
- Automatic throttle control
- 12 Volt DC backup pump providing power to all boom functions
- Mounting hardware for chassis/cab installation
- Full body harness and lanyard
- Painted standard white urethane
Steel line body equipped as follows:
- 24” tread plate tail shelf
- Cable access step at rear and side access
- (2) chrome grab handles at side access
- (2) pool type grab handles for rear tail shelf
- Stainless steel automotive rotary door latches with chain stops on all doors
- LED lighting package installed in tail shelf
- Master door locking system. Excludes 1st vertical curbside
- Wheel chock storage on curbside
- Street Side Compartmentation:
- 1st Vertical: (2) adjustable shelves with dividers
- 2nd Vertical: (1) adjustable shelf with dividers
- Horizontal: Open
- Rear Vertical: (2) adjustable shelves with dividers
- Hot stick shelf with rear access door
- Curbside Compartments:
- 1st Vertical: (2) adjustable shelves with dividers
- 2nd Vertical: Gripstrut access steps to bed area with removable
composite side gate
- Horizontal: Open
- Rear Vertical: (5) fixed material hooks (1-3-1)
- Combination pintle hitch with 2” ball, D rings
- 7 prong trailer connector
- (2) amber strobe lights in tail shelf
- (2) strobes lights in front grill
- Mud flaps
- back up alarm
- Park brake interlock system
- Fire extinguisher
- 3 piece triangle reflector kit
- Wheel chocks
2021 Dodge 5500 4x4 equipped as follows:
- GVWR: 19,500 lbs. payload
- 6.7L I6 Cummins Turbo diesel engine
- 6-speed Aisin AS69RC HD automatic transmission
- Heavy duty front suspension group
- Tradesman Level 1 equipment group
- Electrical accessory group
- Air conditioning
- Cold weather group including engine block heater
- 225/70Rx19.5G all traction tires
- Uconnect 3 with 5” display
- HD vinyl 40/20/40 slit bench seat
- Parkview rear back up camera
- Transfer case skid plate shield
- Painted Bright White clearcoat