Stellar TMAX2-14 Aluminum Mechanic Body equipped as follows:
- Aluminum doors and side packs
- Torsion box understructure with isolated steel crane compartment
- Master-Lock system
- 168” long
- 50” loadbed width
- Six (6) recessed cargo tie-downs
- Two (2) rear mounted grab handles
- 12” aluminum fold down tailgate – painted black
- 21” step bumper with thru compartment
- Vise mounting plate – receiver workbench mount
- Step, slide out for TMAX mechanics work bench bumper
- Rubber fenderettes
- All compartments raised to 60” H x 22” D
- Overlapped doors on SS1V/CS1V and horizontal compartments
- 2 & 3 point stainless steel compression latches
- Stainless steel “Billet Style” hinges
- Spring loaded door stops
- Dual-seal automotive type compartment weather seal
- LED compartment lights
- SS1VF – Heavy duty aluminum drawer set – 35.5” H x 34” W x 18” D – 3-3”, 3-5”, 1-7”, One (1) shelf with (3) dividers with drawer lightbar
- SS1VR – Three (3) shelves with (3) dividers
- SS2V - One (1) shelf with (3) dividers – 36” wide
- SS Horizontal – Heavy duty aluminum drawer set, 11”H x 48”W x 18”D, 3-3”
- SS Rear – Three (3) shelves with (3) dividers
- CS1V – Divider kit with shelves and Oxy-Acetyln bottle holder holds 2 bottles
- CS2V – Three (3) shelf with (3) dividers – 32” wide
- CS3V – Three (3) shelf with (3) dividers – 19” wide
- CS Horizontal – Shelf with 3 dividers – 52” wide
- CS Rear – ½” x 50’ hose reel with roller guide – exits rear of body
- Stellar 46P hydraulic driven air compressor produces 46CFM @ 175 PSI
- 22-gallon air tanks
- FLR system – ¾” air feed for ½” hose reel (filter, lubricator, regulator)
- LED floodlights – Four (4) total. 1 on boom support, 1 SS behind compressor, 1 on each rear taillight box
- Dual LED Trilliant lights - mounted on boom tip – gravity rotating
- Backup alarm
- ICC safety kit – 2.5# fire extinguisher and reflector kit
- Weld-on receiver hitch
- Spray-on bed liner for load bed walls and floors
- Prime painted white
Stellar 12630 telescopic crane equipped as follows:
- 77,800 ft/lb rated when in boost mode
- 12,000# maximum capacity
- 30’ maximum hydraulic reach
- Hexagonal boom – optimized to deliver dramatically less boom flex and side to side movement
- Boom elevation: -10° to 80°
- 400° non-continuous rotation – durable enclosed rotation system with a cast iron base and an internal mechanical stop
- Planetary winch with 100’ of 7/16” wire rope
- Max line pull speed 55ft/min
- Quick release snatch block stow
- Adjustable boom support, roller rest
- Proportional radio remote control – LCD features real time load capacity, maximum distance with the current load, boom angle, and percentage of load
- CDTplus boost mode allows for a momentary 18% increase in the capacity of the crane, and a Safe Mode to keep the crane and operator safe should a load indicating device fail to operate correctly
- On-Demand speed control ramps engine RPM up only when the crane is being used. When crane is not used for 5 seconds engine RPM returns to idle. This lowers fuel consumption and reduces noise pollution in the work area
- Greasable pivot bushings, each pivot pin location includes bushings and grease zerks to provide for years of use
- Hydraulic stabilizers
2026 Ford F750 Supercab equipped as follows:
- Extended cab
- 33,000# GVW
- 6.7L Power stroke V8 turbo diesel – 270HP
- Air brakes
- Exhaust brake
- Engine block heater
- Ford torqshfit HD 10-speed automatic
- Front axle: 12,000#
- Rear axle: 21,000#
- Chrome bumper